Comparison of the Accuracy of a Turntable-3D-Scanner and a 4D-Scanner in the Context of Clothing Development

Authors:

Anselm NAAKE 1, Dzmitry KOMAR 2, Yordan KYOSEV 1, Irene Saura NAVEDO 1

1 Chair of Development and Assembly of Textile Products, ITM, TU Dresden, Germany;
2 SCANECA GmbH, Berlin, Germany

DOI:

https://doi.org/10.15221/24.48

Full paper:

PDF

Keywords:

3d body scanning, 4d body scanning, accuracy, performance

Abstract:

There are different 3D scanner designs and underlying technological principles for performing 3D scans. More sophisticated systems generally use more cameras/sensors and are able to are able to create very controlled conditions for the scan. Less sophisticated systems use less cameras/sensors and the scans are performed under the environmental conditions which result from the location of the scanner. More sophisticated systems can usually carry out the scan in a few fractions of a second, less sophisticated systems have scan times of around half a minute. The resulting higher cost, space requirement and general technological effort of more sophisticated systems is generally offset by a gain in greater accuracy and reliability. However, the extent to which this gain exists and what effect it has on the usability of the scan has not been examined in detail. For this reason, a parallel series measurement was carried out with a turntable 3D scanner and a 4D scanner and the results were compared. The results are presented in this paper.

How to Cite (MLA):

Naake, Anselm et al., "Comparison of the Accuracy of a Turntable-3D-Scanner and a 4D-Scanner in the Context of Clothing Development", 3DBODY.TECH Journal, vol. 1, Oct. 2024, #48, https://doi.org/10.15221/24.48.

Presentation:

VIDEO availble in proceedings

Details:

Volume/Issue: 3DBODY.TECH Journal - Vol. 1, 2024
Paper: #48
Published: 2024/10/30
Presented at: 3DBODY.TECH 2024, 22-23 Oct. 2024, Lugano, Switzerland
Proceedings: 3DBODY.TECH 2024 Proceedings

License/Copyright notice

Copyright © 2024 by the author(s).
This work is licensed under a Creative Commons Attribution 4.0 International License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
The papers appearing in the journal reflect the author's opinions. Their inclusion in the volumes does not necessary constitute endorsement by the editor or by the publisher.


Note: click the + on the top left of the page to open/close the menu.